Irinos boxes can be mounted in 2 different ways:

1.By means of 2 M4 screws, e.g. on a sheet metal plate or on an aluminium profile (Item or similar).

2.Using the EC-MHRM-1 DIN rail adapter on a DIN rail (also known as H rail).

In any case, a very fast exchange of an Irinos box is possible.

Mounting with 2 screws M4

In the bottom of the base box there are 2 holes for screws M4. These are closed with rubber plugs when delivered.

For the attachment are needed:

•2 screws M4

•2 plastic washers M4 (included in scope of delivery)

•Suitable screwdriver

The procedure is described in the following tutorial:

Direct Mounting

Mounting vai DIN rail adapter EC-MHRM-1

The DIN rail adapter is fastened to the bottom of the base box with 2 screws. In the bottom there are 2 holes for screws M4. These are closed with rubber plugs in the delivery condition.

For the attachment are needed:

•DIN rail adapter EC-MHRM-1

•2 screws M4x6 (delivered with DIN rail adapter)

•2 plastic washers M4 (delivered with base box)

•Allen key, size 2.5

The procedure is described in the following tutorial:

DIN rail mounting